Before You Order
- For the 2.0–2.5 liter engines only.
This is a complete Rostra Cruise control kit for the 2019-2023 Ford Transit Connect Van 2.0-2.5 Liter ONLY. Step by step installation instructions included, and located below. Easy installation with very little disassembly. Cruise switch installs on the plastic shroud that surrounds the steering column, on the left hand side. Please call with any questions on this kit.
**** Limit MAX Speed for additional charge ****
With this option, you have the choice of limiting the max speed of the vehicle from 60mph to 80mph in 5mph increments. The speed will be limited whether you are using the cruise control or not. This is a great add on feature for fleet vehicles or inexperienced drivers.
Transit Connect Installation Instructions
Compare related applications in our Transit cruise-control kits category.
Ford Transit Connect 250-9661 FAQ
Which Transit Connect engines are listed for Rostra 250-9661?
This kit is listed for 2019–2023 Ford Transit Connect vans with the 2.0L or 2.5L engine only. Verify your engine before ordering.
Does the Transit Connect 250-9661 kit include installation instructions?
Step-by-step instructions are included. The Transit Connect Installation Instructions PDF link is also available on this page, and the switch mounts on the left side of the steering-column shroud.
How does the optional maximum-speed limiter work on this Transit Connect kit?
The limiter is an optional add-on for an additional charge. Available settings run from 60 to 80 mph in 5 mph increments; the selected limit applies whether cruise control is engaged or not.
1 Review
-
Transit connect cruise control
I was warned that this kit was not a DIY kit. so, it was a tough job getting it installed. On my van I had 7 solder connections under the dash; very tough. the only one that was legitimate was the main power connection. The rest should have been quick plug n play. It all work, though
