This is a complete Rostra Cruise control kit for the 2014-2019 Ford Transit Van, all engine sizes, 3.2, 3.5 and 3.7 Liter. This is the vehicle that replaces the Econoline vans. Step by step installation instructions included. Easy installation with very little disassembly. Cruise switch installs on the plastic shroud that surrounds the steering column, on the left hand side. Please call with any questions on this kit.
**** Limit MAX Speed for additional charge ****
With this option, you have the choice of limiting the max speed of the vehicle from 60mph to 80mph in 5mph increments. The speed will be limited whether you are using the cruise control or not. This is a great add on feature for fleet vehicles or inexperienced drivers.
Ford Full Size Transit Cruise Control Installation Instructions
Posted by Randall on 30th Nov 2020
Installed easily. Several videos available on net if you look. Instructions implied I needed to cut / splice two wires. This was already done with a connector. All I needed to do was tap into the ignition connector and use the enclosed other connections. Worked perfectly driving in and arround the Appalachian mountains of TN, NC and GA Nov/2020. Only issue I had was the green on/off light is hard to see in bright daylight.
Posted by George on 1st Jan 2020
Received and installed the cruise control. Took it on a trip from Texas to Colorado and it performed flawlessly! Made the trip much more easier. There is a slight lag as the manufacturer stated in the user directions and speed is maintained within 1 or 2 mph but overall a great product. Only comment is that the instructions need to be updated to match the product improvements. Installation is easier than the instruction or online video depicts. Next up is cutting out the excess wire in the harness for less clutter under the dash.